Introduction of vacuum tube furnace
Vacuum furnace to silicon rods as heating element, rated temperature of 1500 degrees Celsius, using B-type double-parked and 708P old thermocouple temperature controller automatic temperature control, with high precision temperature control, in addition to the furnace also has a vacuum device can work in a variety of atmosphere, greatly improve the use of the furnace with the use of high temperature, high-precision temperature control, simple operation, easy maintenance, etc., can be widely used in metallurgy, machinery, light industry, commodity inspection, higher Universities and research sectors.
The main features of vacuum tube furnace temperature control table:
1. The advanced artificial intelligence algorithm, no overshoot, with self-tuning function, can control any lifting the temperature slope, with a jump, run and pause, and stop operations and other programmable commands.
2. Enter the digital calibration system, measuring accuracy up to 0.2;
3. Ultra-limit alarm and input open alarm and so on;
4. With 50 segment programming functions can be set to a given value of any size Ramping;
5. Has the power processing mode, the measured values start function and setup function, do the program implementation of more efficient and get more perfect;
6. The power-down protection, since this Ridiculous EPROM chip, making all kinds of data input can be reliably protected in the event of mains failure and disruption. Therefore, workers should have a good understanding of the detailed description of the vacuum furnace in order to better operate.
Three phase electric high temperature muffle furnace
Three temperature zone inclined tube furnace
Touch screen inclined rotary tubular furnace